The 3400XT wood hog horizontal grinder has a standard width making it within the legal transport width in any country.
Its standard width of 8’4″ (2.53 m) is legal in any country, no matter what engine is used. This model accommodates engines from 540 to 800 horsepower (402 to 596 kW), allowing it to be used for a broad range of applications in a wide variety of markets worldwide. It is also available with electric power. The size of the 3400XT allows the same model, using a broad range of engines, to be configured for multiple applications and global markets without additional design considerations. The infeed bed is an additional 24 inches (60.96 cm) longer with sloped sides. This configuration improves operator sight lines for more efficient loading of material. Standard on the 3400XT is a removable infeed chain return floor, which allows excess material to fall away to minimize the wear on the floor, bed chain and inserts, particularly useful in land-clearing or other applications with dirty material.
The variable-speed infeed system consists of one 34-inch (86.36 cm) diameter top compression feed roll; a direct-driven internal planetary drive with no chains and sprockets for lower maintenance, more torque and better durability; and four strands of WDH-120 chain in a staggered configuration. When maintenance is required, it can be performed with ease on the extended platform. The area between the hood and the engine has been reconfigured to provide an additional 12 inches (30.48 cm) of working space, for better access to components for general maintenance or to change screens.
Morbark’s driveline protection system is standard on all Wood Hog models. The externally adjustable, break-away torque limiter helps to protect the driveline and hammermill from catastrophic damage caused by contaminants. The 3400XT is available with either Strickland or CAT undercarriage options. While the first unit built is a tracked unit, this model can be manufactured in a trailer or stationary unit as well (3400X). The remote-mounted radiator and oil cooler have independent reversing fans. The 3400XT is equipped with the Morbark Integrated Control System which allows the operator to automatically adjust feed rates and monitor pressures and feed wheel position to maximize production and engine efficiency. New smart device apps allow one to connect to the machine using a phone or tablet’s Bluetooth or allow you to connect your machine directly to Morbark, so Morbark personnel will be able to view and edit your machine’s settings and program or send you updated programming.
Other standard features include an 11-horsepower (8.2 kW) air compressor for general maintenance and changing inserts; the self-contained rod puller for changing rods in the hammermill; and a magnetized end pulley with collecting slide tray for removal of ferrous metals. Source