The C5 sliding boom crane and the C44+ parallel cranes are now available.The C5 has been designed to provide more lifting power and have increased reliability. It will be used on Ponsse Ergo harvesters. The crane makes use of two direct-drive slewing motors. It can be configured with external or built-in hydraulic hose sets. The boom head has been developed with a multi-plate swing dampener at the top of the hanger, allowing the head to be more controlled without sacrificing speed.
The C44+ replaces the C22+ and C44 models and can be used on Ponsse Ergo, Fox and Beaver harvesters. It is available with one or two slewing motors for the Ponsse Ergo, two motors for the Ponsse Fox and one motor for the Ponsse Beaver. Key technical information for both cranes is included in the table below.
| Ponsse C5 sliding boom crane | Ponsse C44+ parallel crane | |
| Reach | 10 m | 10 / 11 m |
| Lifting moment (gross) | 248 kNm | 240 kNm |
| Slewing moment | 57 kNm | 43 to 57 kNm |
| Slewing angle | 250 degrees | 250 degrees |
Source: http://www.ponsse.com/